Send Email
Send SMS
Search
Mohan Brothers
Mohan Brothers


Heat Transfer Lab Equipments

Leading Manufacturer of lagged pipe apparatus, concentric tube heat exchanger, theramal conductivity of insulating slabs, composite walls apparatus, pin fin apparatus and heat transfer agitated vessel from Ambala.

Lagged Pipe Apparatus

REQUEST CALLBACK

Lagged Pipe Apparatus
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
PhaseSingle Phase
Floor Area1.5 Meter x 1 Meter x 0.5 Meter High
Voltage230 V AC
Gl Pipe Innermost6 cm. (Outer Diameter)
Gl Pipe Middle8.5 cm. (Mean Diameter)
GI Pipe Outermost10.7 cm. (inner Diameter)
Length of Pipes1 Meter

We are recognized as one of the prominent organizations of a wide gamut of Lagged Pipe Apparatus that is used for measurement of thermal conductivity. Our offered apparatus is manufactured by our adept engineers employing updated technology and optimum quality basic material in accordance with the set industry standards. These apparatus has gained appreciation of our clients for its continuously functioning for long hours. Clients can avail this range from us in various specifications.

Features:
  • Elevated service life
  • Precisely-designed
  • Least maintenance

Heater:
  • Nichrome wire cartridge heater placed centrally, of suitable capacity

Control Panel:
  • Single Phase Dimmerstat - 1 No
  • Voltmeter (0 - 250V) - 1 No
  • Ammeter (0- 2A) - 1 No

Temperature Indicator:
  • Multichannel Digital Temperature Indicator ranging (0 - 300 C) using Cr/AI Thermocouples


Additional Information:

  • Item Code: 1401
Yes! I am interested

Concentric Tube Heat Exchanger

REQUEST CALLBACK

Concentric Tube Heat Exchanger
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
PhaseSingle Phase
Current15 Amp
Floor Area3m x I m x 1 m height
Measuring Flask Capacity1 Litre
Geyser3 kW
Voltage220 V AC

Specifications:
  • Inner copper tube I.D. 12.7mm. and outer G. I. Pipe I. D. 25mm. approx. and 1m. length.
  • Thermometers - 4 nos.
  • Orifice meter along with manometer.




Additional Information:

  • Item Code: 1415
Yes! I am interested

Theramal Conductivity Of Insulating Slabs

REQUEST CALLBACK

Theramal Conductivity Of Insulating Slabs
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Main Heater Plate Diameter110 mm
Radial Guard Heater Plate ID120mm
Radial Guard Heater Plate OD200 mm
Water Circulated Cooling Plates2 nos
Temperatures0.1 deg C
Voltage230 V AC
Water Supply of About4-5 lit/min.
Bench Area1m x lm x O.5m height.

Theramal Conductivity of Insulating Slabs By Guarded Hot Plate Method:

The apparatus consists of a slab assembly. The main Heater and a radial guard heater are sandwiched between copper plates. The specimen in the form of slabs of equal thickness are placed on either sides of heaters and cooling plates through which water is circulated are on the other Sides of the specimen. The radial guard heater ensures all heat of the main heater to pass axially through the specimens which is collected by cooling plates. By knowing the temperatures and Heat input, thermal conductivity of specimen can be calculated. The test set up is enclosed in an enclosure with insulation inside to provide undisturbed Surroundings. The design style of the apparatus is similar to as recommended in INDIAN standard. The difference is in sizes.

 

Yes! I am interested

Composite Walls Apparatus

REQUEST CALLBACK

Composite Walls Apparatus
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
MaterialM.S. Plates
SpecificatiHeater Mica Healer of Diameter250 mm
Thickness25 mm
Voltage230 V AC
Bench AreaIm x lm x 0.5m height

By keeping the track of advanced market development, we are engaged in offering an unparalleled range of Composite Walls Apparatus. The offered apparatus is manufactured utilizing best grade raw material and modish technology in strict compliance with the industry quality norms. Along with this, the offered range is known for its remarkable features, thus widely demanded in the market. It is designed for study of Heat transfer through composite slab made up of different materials.

Features:
  • Rugged design
  • Corrosion-resistance body
  • Excellent performance


Plates:

  • Bakelite plates of thickness 10mm & dia. 250mm.-2 nos
  • Brass/Aluminum plates of thickness 15mm & dia. 250mm.-2nos
  • Dimmerstat - 2 A capacity

Measurements:
  • voltmeter and an Ammeter to measure input power
  • Multichannel digital temperature indicator to measure temperatures at- various points
  • A technical manual accompanies the unit




Additional Information:

  • Item Code: 1400
Yes! I am interested

Pin Fin Apparatus

REQUEST CALLBACK

Pin Fin Apparatus
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
MaterialM.S and Brass
Voltage220 V AC
PhaseSingle Phase
Floor Area2m x 1m x 1m height
No of PinsThree Pin

Specifications:

Al:
  • Channel- 150mm x 100mm x 1000mm
  • Blower - run by f.h.p. motor.
  • Orifice meter along with water manometer to measure airflow.
  • Voltmeter and ammeter to measure power input.
  • Cr- Al thermocouple with 6 tapings along with temperature indicator.
  • Dimmerstat to control power input.
  • A band heater to heat the pin fin.


Additional Information:

  • Item Code: 1404
Yes! I am interested

Heat Transfer Agitated Vessel

REQUEST CALLBACK

Heat Transfer Agitated Vessel
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
PhaseSingle Phase
Voltage230 V AC
Current15 Amp
Water Flow4 to 5 litre
Floor Area1.5 mtr. X 1 mtr. X 1 mir height

Specifications:
  • Vessel approx. 20 lit. capacity, provided with glass wool insulation all around and electric heater at the bottom.
  • Agitator 150 mm dia, with 1/8 HP motor to drive the agitator.
  • Helical coil - 200 dia, 8 turns, made of 3/8" dia. copper tube.
  • Controllers for heater and agitator motor.
  • Temp. Indicator for vessel water temperature and circulated water inlet and outlet.




Additional Information:

  • Item Code: 1408
Yes! I am interested

Critical Heat Flux Apparatus

REQUEST CALLBACK

Critical Heat Flux Apparatus
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Bench Area1m. x 05m.
Voltage230 V AC
Current15 Amp
Frequency50 Hz
Power SourceElectric

Specifications:
  • Water heating tank provided with electric immersion heater.
  • Hemisphere made of copper sheet, 200mm. dia. Surrounded water jacket of 250mm. Dia.
  • Test disc made of copper 20mm. dia. provided with thermocouple at the center.
  • Multichannel digital temperature indicator 0-200 C with 0.1C least counts to measure the temperature of hemisphere and disc.
  • Audible buzzer with timer to ring at every 5 seconds.
  • A technical manual accompanies the unit.




Additional Information:

  • Item Code: 1411
Yes! I am interested

Thermal Conductivity Insulating Apparatus

REQUEST CALLBACK

Thermal Conductivity Insulating Apparatus
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Voltage220 V AC
PhaseSingle Phase
Floor Surface1m x 0.5m
Inner Sphere Diameter100mm
Outer Sphere200mm

Specifications:
  • Mica heater two heat the inner sphere surface.
  • Ten thermocouple tappings in the test section.
  • Plaster of Paris / asbestos powder in the test section.
  • Panel comprises of
  • Voltmeter and ammeter
  • Dimmerstat
  • Temperature indicator




Additional Information:

  • Item Code: 1419
Yes! I am interested

Thermal Conductivity Apparatus

REQUEST CALLBACK

Thermal Conductivity Apparatus
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
UsageIndustrial
Floor Space0.75m. x 1.5m.
Voltage230 V AC
PhaseSingle Phase
Frequency50 Hz

Specifications:
  • Guarded hot plate assembly comprising of main heater, ring guard heater and top guard heater, mounted over the liquid test cavity.
  • Cold plate assembly provided with water connections.
  • The assembly is housed in an enclosure box with glass wool insulation.
  • Instruments panel consisting of :
  • Digital voltmeter and ammeter of suitable range.
  • Dimmerstat for controlling input to the heaters (2 amp. 3 Nos.)
  • Multichannel digital temperature indicator.




Additional Information:

  • Item Code: 1420
Yes! I am interested

Thermocouple Calibration Test Rig

REQUEST CALLBACK

Thermocouple Calibration Test Rig
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Vibrator (V)220 V AC
Table Surface Area2 m X 1 m X 0.5 m
Frequency50 Hz
Ice Cubes0.5Kg. Approx
A Water Container with Heater1 kW

Specifications:
  • A digital mV Meter and a digital temperature indicator with 2 different type of thermocouples.
  • A technical manual accompanies the unit.




Additional Information:

  • Item Code: 1422
Yes! I am interested

Heat Pipe Apparatus

REQUEST CALLBACK

Heat Pipe Apparatus
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Voltage230 V AC
PhaseSingle Phase
Floor Area1 m X 0.5m X 0.5 m height
Frequency50 Hz

With thorough understanding of the relevant industry, we are offering a wide range of Heat Pipe Apparatus that is mainly used in electronic industry. This apparatus is manufactured using optimum quality raw-material and highly developed technology. In tune with different requirements of our copious clients, we customize the entire range in various sizes and other related specifications. Our offered range has gained exceptional value amongst our clients for its defined features.

Features:
  • Precisely designed
  • Sturdiness
  • Long operational life

Specifications:
  • Heat pipe - Stainless Steel pipe, 25 mm O.D., 450 mm. Long. Sealed at both ends, evacuated and filled partially
  • with distilled water - one No
  • Copper and stainless steel pipe of same size as that of heat pipe - one each
  • Equal capacity heater at bottom end of each pipe
  • Water filled heat sinks at upper end of each pipe

Measurements And Controls:
  • Dimmerstat to control heat input to all the heaters - 4 amp. Capacity One No
  • A voltmeter and an ammeter to measure input to heaters One each
  • Multichannel digital temperature indictor to measure temperatures along the length of pipes.Four
  • thermocouples are provided on each pipe
  • Thermometers to note down water temperatures in heat sinks - 3 Nos




Additional Information:

  • Item Code: 1402
Yes! I am interested

Natural Convection Apparatus

REQUEST CALLBACK

Natural Convection Apparatus
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Bench Area1.5m x 0,75m
Voltage230 V AC
Current5 Amp
Frequency50 Hz

Specifications:
  • Pipe - Brass pipe, 38mm. dia. (OD) 500mm. long, fitted with cartridge heater inside.
  • Thermocouples are fitted along with the length of pipe for Temperature measurement - 7 nos.
  • Enclosure 200mm. x 200mm. x 800mm. size, with one side of Perspex sheet.
  • Measurements & Controls
  • A Dimmerstat for heater input control.
  • Voltmeter and Ammeter for heater input measurement.
  • Multichannel digital temperature indicator



Additional Information:

  • Item Code: 1405
Yes! I am interested

Emissivity Measurement Apparatus

REQUEST CALLBACK

Emissivity Measurement Apparatus
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Floor Space Area1.5m x 1 m.
Voltage230 V AC
Current15 Amp
Frequency50 Hz

Specifications:
  • Test plate and Black plates — 160mm. Dia. Aluminum plates, mounted in Panel with mica heater inside.
  • Instrumental panel consisting of-
  • Voltmeter and ammeter for input measurement to both heaters through a selector switch.
  • Separate dimmers for both the plates.
  • Multichannel digital temperature indicator.




Additional Information:

  • Item Code: 1409
Yes! I am interested

Stefan Boltzmans Apparatus

REQUEST CALLBACK

Stefan Boltzmans Apparatus
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Bench Area1m. x 05m.
Voltage230 V AC
Current15 Amp
PhaseSingle Phase

Specifications:
  • Water heating tank provided with electric immersion heater.
  • Hemisphere made of copper sheet, 200mm. dia. Surrounded water jacket of 250mm. Dia.
  • Test disc made of copper 20mm. dia. provided with thermocouple at the center.
  • Multichannel digital temperature indicator 0-200 C with 0.1C least counts to measure the temperature of hemisphere and disc.
  • Audible buzzer with timer to ring at every 5 seconds.
  • A technical manual accompanies the unit.




Additional Information:

  • Item Code: 1410
Yes! I am interested

Tube Heat Exchanger

REQUEST CALLBACK

Tube Heat Exchanger
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Floor Space1.5m. X 1m
Current15 Amp
Power3 kW
Voltage230 V AC

Specifications:
  • Shell - 150NB, 750 m.m. long provided with end boxes.
  • One end box with divider plate.
  • 25% cut baffles - 4 Nos. in the shell.
  • Tubes - 4.5mm I.D., 6.35mm O.D.,250 m.m. length copper tubes with triangular pitch.
  • Instantaneous water heater, 3 Kw capacity, to supply hot water.
  • Thermometer for measuring the water temperature.
  • Valves to control hot and cold water flow.

Services Required:

  • Water supply at the rate of about 10 lit/min at constant heat.


Additional Information:

  • Item Code: 1416
Yes! I am interested

Thermal Conductivity Metal Rod

REQUEST CALLBACK

Thermal Conductivity Metal Rod
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Bench Area1.5m. x 1m.
Voltage230 V AC
Water Supply2 lit/mm
PhaseSingle Phase

Specifications:
  • Metal Bar - 25mm of adequate length, provided with 8 Thermocouples along the length, Band heater at one end and water-cooled heat sink at other end. Test portion of bar is insulated.
  • Instruments panel comprising of.
  • Dimmerstat 0-230v, 2A, capacity.
  • Multichannel Digital temperature Indicator.
  • Measuring flask and stop clock




Additional Information:

  • Item Code: 1418
Yes! I am interested

Specific Heat Of Air Apparatus

REQUEST CALLBACK

Specific Heat Of Air Apparatus
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
TemperatureRange 0 to 300 C
Voltage220 V AC
Floor Space2 m. X 1 m. X 2 m. Height
PhaseSingle Phase

Specific Heat of Air Apparatus:

The apparatus consists of heating element on which the air is blown. The difference in temperature of air is shown by the temperature indicator. The flow of air is measured by the orifice meter. The input to the heater is measured by voltmeter and ammeter. Thus the specific heat of air can be found out.

 

Specifications:

  • Air blower connected to FHP motor.
  • Orifice meter to measure the air flow, Heater – 1 KW heating coil placed centrally in the test section.
  • Multi channel digital temperature indicator – range 0 to 300 c.
  • Voltmeter and ammeter to measure the heat Input.


Additional Information:

  • Item Code: 1407
Yes! I am interested

Plate Type Heat Exchanger Apparatus

REQUEST CALLBACK

Plate Type Heat Exchanger Apparatus
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Floor Space1.5m. X 1m
Voltage230 V AC
Power3 KW
Plate MaterialSS

Plate Type Heat Exchanger Apparatus

The unit consists of a plate type heat exchanger, in which cold fluid is cold water and hot fluid is hot water, which is obtained from geyser. The inlet and outer connections of the fluids are positioned so as to make the exchanger counter flow type. Hot and cold fluids pass between alternate plates various measurements provided enables the students to determine heat transfer rate, LMTD, heat transfer coefficients and effectiveness of the heat exchanger.

Specifications

  • Heat Exchanger- S.S. Plate heat exchanger wiles nos. of 200 X 400mm.
  • Calibrated water flow measuring vessel
  • Thermometers to measure inlet and outlet temperatures of fluid.
  • Flow controls valves.

A technical manual accompanies the unit.

Optional Accessories

  • Rotameters to measure water flow rates instead of measuring vessel.
  • Multi channel digital temperature Indicator to measure the temperatures instead of thermometers.

Yes! I am interested

Forced Convection Apparatus

REQUEST CALLBACK

Forced Convection Apparatus
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Bench Area1m. x 0.75 m.
Voltage239 V AC
Current15 Amp

Specifications:
  • Test pipe - 32mm NB GI pipe, 500 mm. long, heated by band heater, outside.
  • Centrifugal blower to force air through test pipe with How control valve.
  • Variac 2A, capacity to force air through test pipe with flow control valve.
  • An orifice meter with differential water manometer.
  • Voltmeter and Ammeter to measure heater input.
  • Multichannel digital temperature indicator to measures various temperatures.
  • A technical manual accompanies the unit.


Additional Information:

  • Item Code: 1406
Yes! I am interested

Separating Calorimeter

REQUEST CALLBACK

Separating Calorimeter
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Voltage220 V AC
Frequency50 Hz
PhaseSingle Phase
Loading MethodStatic Load
Accuracy Grade0.5

Yes! I am interested

 
X


Explore More Products

Contact via E-mail
Contact via SMS
Mohan Brothers
Vivek Sharma (Executive Director)
No. 276, HSIIDC, Saha Industrial Area , Sadar Bazar,
Ambala - 133001, Haryana, India
Call Us: 
Call Response Rate: 30%
Share Us :
F G T L



Home  |   Profile   |  Our Products  |  Site Map  |   Contact Us

© Mohan Brothers. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Mohan Brothers